Please visit our new website
Electronic
Equipment Environmental Shelters Manufacturer.
Ramim products are in service
with the Israel Defence Forces
(IDF), the U.S. Army, and
armed forces in Europe,
the Far East and
South America. The high quality
shelters are supplied to Israel Aircraft
Industries, Israel
Military Industries, Tadiran and a prestigious list of
international defense manufacturers.
Combining Ruggedness
with Light Weight
Ramim products are ruggedized
for the harshest conditions.
They are
lightweight, and are easy to transport in the mobile
modern battlefield.
Customized
Products
Ramim products are designed
for the easy integration of tactical
equipment. Powered by over
25 years experience, the
Ramim
engineering team tailors
orders to customer specifications,
down to the last connection
element.

Technical Description
Ramim environmental solutions
feature a hot bonded sandwich panel
construction.
The core is polyurethane slab.
Kiln dried epoxy coated
oak stringers serve as the
thermal barrier. Extruded aluminum structural
elements are available
for mechanical connections.
The panels are hot
bonded with epoxy adhesives.
The facing and internal
panels are of
smooth aluminum. All corners
contain polyurethane foam to fill up
any
voids and reinforce and seal
the body at sensitive points. Matting
insulation against
electrification can be installed.
S-250
S-280
Meeting
Military Standards
Ramim's Quality Control System
complies with MIL-Q-9858-A and
has been approved for ISO
9000.
Ramim Portable environmental
shelters also meet the following
standards:
-
EMI, RFI, EMP, in accordance
with MIL-STD-285
-
Spot welding per MIL-W-6858 Class
B
-
Hot Bonding system per: MIL-S-55541
H(GL) and
MIL-S-55286E
-
Metalizing per MIL-M-3800 Class
B
-
Paints and treatments per MIL-F-14072
C(ER)
-
Inert gas welding per MIL-W-8604
S-280/C/G
Electronic Equipment Shelter
-
NSN 5411-01-092-0892
Unshielded
-
NSN 5411-00-304-3069 Shielded
(EMI kit incl.)
Mechanical Data
-
Exterior - 147"
L x 87" W x 86 3/8" h.
-
Interior - 138"
L x 81 1/2" W x 74 1/2" h.
-
Heat transfer coefficient
- U-Factor-0.28 BTU/hr/sq. ft./F
-
Payload - 5000
lbs - standard configuration
(adaptable
for higher payloads).
-
RFI shielding -
with addition of RFI modification kit MK-1079/G,
attenuation
of 60 db minimum over spectrum of 150 KHz to
10,000 MHz
for electric and magnetic fields and plane waves
when
measured in accordance
with MIL-STD-285.
-
Water tightness
-completely water-tight; tested on 21 inch fording
depth and to
simulated rainfall.
-
Operating temp.
- -65F to +125F plus solar load. Non operating
temp. -80F
to +160.
-
Mounting member
support loads - Wall, roof and floor tensile
load of 2000
lbs. Followed by 100 inch pounds torque load
5/16" - 18
inserts.
-
Latching device
- three point roller cam latching mechanism
provides ease
of personnel door operation while maintaining
weather and
RFI integrity
-
Roof load - snow
and ice load of 75 lbs./sq.ft.
-
Skids - three full
length replaceable shock absorbing type.
-
Floor load - strength
to accept 2500 lbs. over any 3 sq.ft.
area without
permanent set.
-
Roof access - three
recessed folding steps in side wall
and one roof
handhold.
-
Panel Construction
Hot bonded sandwich consisting of
polyurethane
foam core, aluminum skins and a framework
of high strength
all riverted aluminum alloy extrusions.
-
Lifting eyes -
four (4) eyes with 3" inside clearence 14,400 lbs.
tensile load
per corner in any direction.
-
Towing eyes - four
(4) eyes with 2" inside clearance. 14,400 lbs.
tensile load
per corner in any direction.
|
S-250
Shelter | S-280 Model | Contact
us | Home Page | About Ramim | ISO
Shelter |
Ramim
P.O.B
32169 Tel-Aviv, Israel,
Tel:
972-050-5954448 Fax: 972-(151)-50-5954448
E-Mail:
info@army-shelters.com